§602.240. Plans

 

a)         Unless otherwise specified by the Agency, plans submitted to the Agency must provide the following:

 

1)         a suitable title;

 

2)         the name of the owner of the community water supply;

 

3)         the area or institution to be served;

 

4)         a scale;

 

5)         a north point;

 

6)         the data used;

 

7)         the boundaries of the municipality or  area to be served;

 

8)         the date and the name and address of the designing engineer;

 

9)         a professional engineer's seal and signature to satisfy Section 602.105(a)(4);

 

10)         the locations and sizes of existing water mains;

 

11)         the locations and nature of existing water works structures and appurtenances affecting the proposed construction, noted on one sheet;

 

12)         the locations of any petroleum storage tanks within 400 feet of the proposed construction; 

 

13)         dimensions, elevations and explanatory notes; and

 

14)         details as specified in Sections 620.245 through Section 602.260.

 

b)         Plans must be drawn to a scale that will describe the proposed structures and equipment.

 

c)         The size of plans submitted to the Agency must not exceed 24 inches by 36 inches.

 

(Source:  Added at 40 Ill. Reg. 6799, effective April 15, 2016)